郑力 |
郑力，教授，清华大学工业工程系常务副系主任
电子邮件： lzheng@tsinghua.edu.cn
办公地点： 清华大学舜德楼北506A
办公电话： +86-10-6278-5584
传真号码： +86-10-6279-4399
郑力，1986年和1991年分别获得清华大学本科和博士学位，94-96年曾在佐治亚理工大学访问，现任清华大学工业工程系教授，博士生导师。郑力教授已发表文章超过二百篇，专著和教材5本，曾获得国家科技进步奖、国家发明奖和教育部优秀青年教师奖，北京市五一奖章，享受国务院特贴。郑力教授的主要研究领域是生产与物流管理、生产系统分析和企业信息化。郑力教授还是机械工程学会工业工程分会副主任委员和生产工程分会的常务理事，国际工业工程学会中国部首任主任和多个国际学术期刊的编委。
教育背景 1981 - 1986： 清华大学精密仪器与机械学系，1986年获工学学士学位
1986 - 1988： 清华大学精密仪器与机械学系，硕士学习
1988 - 1991： 清华大学精密仪器与机械学系，1991年获工学博士学位
工作履历 2008.05 - 现在： 清华大学机械学院副院长
2005. 03 - 现在： 清华大学工业工程系，教授，执行系主任
2004. 12 - 2005. 03： 德国亚琛工业大学，访问学者
2001. 09 - 2004. 12： 清华大学工业工程系，教授，常务副系主任
1999. 02 - 2001. 09： 清华大学精密仪器与机械学系，教授，制造工程研究所所长
1997. 09 - 1999. 09： 清华大学精密仪器与机械学系，教授，制造工程研究所副所长
1996. 02 - 1997. 09： 清华大学精密仪器与机械学系，副教授
1994. 02 - 1996. 02： 美国佐治亚理工大学机械系，合作研究，访问教授
1993. 09 - 1994. 02： 清华大学精密仪器与机械学系，副教授，系主任助理
1991. 03 - 1994. 02： 清华大学精密仪器与机械学系，讲师，机器人研究室副主任
学术兼职 1. 学术期刊任职
Editorial Board, International Journal of Industrial and Systems Engineering (2006-present)
Editorial Board, International Journal of Internet Manufacturing and Services (2006-present)
Editorial Board, International Journal of Human-Computer Interaction (2005 - present)
Editorial Board, International Journal of Electronic Business Management (2005-present)
Associate Editor, Robotics and Computer-Integrated Manufacturing (2005-present)
Editorial Board, International Journal of integrated Computer Aided Engineering (2004-present)
Co-Editor in Chief, Industrial Engineering and Management (in Chinese) (2003-present)
2. 学术会议任职
Vice Chairmen of Scientific & Technical Committee in 2004, 2005, 2006, member of Scientific & Technical Committee in 2003, chairmen of Organization Committee in 2003, International conference on Industrial Engineering & Engineering Management
Member of Programming committee in 2006, 2004, 2002, 2000, International Conference on frontier of Design and Manufacturing
Member of Intrenational academic Committee, International conference on Agile Manufacturing (2003)
Invited keynote speaker at the workshop on Smart Business Network (Netherland, 2006)
Invited speaker at CIEADH Meeting (USA, 2006)
General Chair, 2005 IEEE International Conference on Service Operations and Logistics, and Informatics (China, 2005)
Chair, The symposium on "Olympic Logistics: Learning from the Past and Planning for the Future" (China, 2005)
3. 学术组织兼职
Member, the Institute of Industrial Engineering
Founding Chair, China Chapter, IIE (2004-2005)
Fellow of Chinese Society of Mechanical Engineering (2004-2006)
Fellow of Chinese Society of Production Engineering, CSME (2003-2006)
Chair, Council of Production System, CSPE/CSME (2004-2006)
研究领域 1. 合作制造关键工具
合作成为企业提高效率的关键，需要针对不同的情况，研究和开发不同的工具。目前正在研究和开发的有5种工具
合作基础环境：提供基础的各种合作交流环境，如：公告板系统、实时交流系统、白板系统等
产品数据管理工具：研究新一代面向合作产品开发的数据管理系统
工艺设计和数据管理工具：研究能够适应复杂工艺设计要求的协同工艺设计和工艺数据管理系统
生产数据管理工具：支持中小企业的、基于薄客户端计算模型的生产数据管理方法及其工具
远程生产监视工具：提供远程设备维护和诊断功能
2. 工业工程
物流工程：包括规划和优化生产物流系统、商业物流系统；物流信息系统的体系结构和使能技术
卓越工程：通过“改善”提升生产率的方法
3. 生产系统分析、仿真和设计
研究复杂生产系统，包括流水线、柔性制造单元的特性、设计方法学，以汽车为对象，综合应用分析和仿真工具，设计和优化生产系统，主要研究包括
生产线的物流仿真和优化设计
基于仿真的生产线调度优化
先进生产计划与优化系统
4. 虚拟产品开发
通过开发流程和关键工具的开发，提高机床企业的开发能力。主要研究包括
产品数据管理系统：包括工作流管理、产品配置管理等
虚拟装配系统：对产品设计进行初步的校验，发现静态和动态的干涉
CAPP系统：与设计数据的有效集成，半自动地进行工艺设计和规划
物理学特性的仿真：如整机和部件的动力学和热力学特性的有限元分析和仿真
5. 切削建模与仿真（BETTERCUT系统）
研究一个结合几何和物理仿真，能够进行各种数控代码优化的加工过程仿真和优化系统；研究考虑能针对任意复杂零件和加工轨迹，并结合切削的物理模型，给出加工的物理学特性，如：切削力、工件变形、颤振等。系统分为5个子系统
几何仿真系统：探索开发一个通用的几何仿真引擎，能对复杂的形状和多轴运动进行仿真
物理仿真系统：研究切削的物理学模型，将其与几何仿真系统的输出衔接，获得实际切削的物理参数仿真
优化系统：根据不同的加工要求，提供不同的优化方案，对实际的数控代码进行优化
输入、输出系统：提供方便的工件、加工轨迹的输入和输出
奖励与荣誉 2003年： 北京市“五四”奖章
“教书育人先进集体”智能制造系统与机器人学博士生指导小组
2000年： “霍英东基金”奖励
1999年： “首届教育部优秀青年教师奖”
1997年1月： 教委科技进步三等奖；课题名称：“机器人装配技术的若干基础技术研究”
1996年： “清华之友－优秀青年教师奖励金（一等）”
1992年： “清华之友－优秀青年教师奖励金（二等）”
1992年9月： 在“清华大学部分优秀青年教师事迹展览（一）”中被表彰
1992年： 宝钢社会实践二等奖；课题名称：“成型辊加工改进”
1991年： 清华大学系级优秀教材奖；讲义名称：“切削过程监视与控制”
1991年： 第二届中国机床工具博览会中国数控技术展区展品优秀奖；课题名称：“DJ-01型声发射车削监视仪”
1991年： 国家75攻关重大成果奖励（集体）；课题名称：“盘套类零件柔性制造单元及刀具监控”
1991年： 国家75攻关重大成果集体荣誉证书；课题名称：“车铣加工中心声发射刀具监控系统”
1991年： 机电部75攻关重大成果集体荣誉证书；课题名称：“车削、铣削加工中心声发射监测传感器及监控系统的研究”
1990年12月： 国家发明四等奖；课题名称：“切削过程声发射监视(控)装置与方法”
学术成果 主要国际期刊论文
A study on calibration of coefficients in end milling forces model，Zhang, Zhihai; Zheng, Li; Zhang, Lei; Li, Zhizhong; Liu, Dacheng; Zhang, Bopeng，International Journal of Advanced Manufacturing Technology, v 25, n 7-8, April, 2005, p 652-662
Prediction of cutting forces in end milling of pockets， Zhang, Lei; Zheng, Li Source: International Journal of Advanced Manufacturing Technology, v 25, n 3-4, February, 2005, p 281-287
On the prediction of chip flow angle in non-free oblique machining，Wen, D.H.; Zheng, L.; Li, Z.Z.; Hu, R.S. Source: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, v 218, n 10, October, 2004, p 1267-1278
Prediction of cutting forces in milling of circular corner profiles, Zhang, Lei (Sch. of Mech. Sci. and Engineering, Nanling Campus, Jilin University); Zheng, Li Source: International Journal of Machine Tools and Manufacture, v 44, n 2-3, February, 2004, p 225-235
An improved chip flow model considering cutting geometry variations based on the equivalent cutting edge method, Wen, D.H. (Department of Industrial Engineering, Tsinghua University); Zheng, L.; Li, Z.Z.; Hu, R.S. Source: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, v 217, n 12, 2003, p 1737-1745
A solid model-based milling process simulation and optimization system integrated with CAD/CAM，Li ZZ, Zheng M, Zheng L, Wu ZJ, Liu DC, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY ，138: 513-517 Sp. Iss. SI JUL 20 2003
An investigation of cutting forces in horizontal-mode peripheral milling of curved surfaces，Zhang L, Zheng L, Zhang ZH，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE，217 (7): 961-976 2003
A cutting force model for a waved-edge end milling cutter，Zhang Z, Zheng L, Li Z, Liu D, Zhang L, Zhang B，INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY，21 (6): 391-396 2003
On cutting forces in peripheral milling of curved surfaces，Zhang L, Zheng L, Zhang ZH, Liu Y, Li ZZ，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE，216 (10): 1385-1398 2002
On the removal of material along a polishing path by fixed abrasives，Zhang L, Tam HY, Yuan CM, Chen YP, Zhou ZD, Zheng L，PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE，216 (9): 1217-1225 2002
E-DREAM: A web-based platform for virtual agile manufacturing，Tang DB, Zheng L, Chin KS, Li ZZ, Liang YL, Jiang XJ, Hu CJ，CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS，10 (2): 165-183 JUN 2002
STEP-based Product Modeling for Concurrent Stamping Part and Die Development, Dunbing Tang, Li Zheng, Zhizhong Li, Computers in Industry, 2001.8, Vol. 46, Iss. 1; pg. 75
An intelligent feature-based design for stamping system, Dunbing Tang, Li Zheng, Zhizhong Li, International Journal of Advanced Manufacturing Technology, 2001 Volume 18, Issue 3, pp 193-200
Re-engineering the design process for concurrent engineering, Dunbing Tang, Li Zheng, Zhizhong Li, et al.,Computers & Industrial Engineering, 2000,38(4), 479-491
End Milling System Compliance and Machining Error, Machining Science and Technology, Liang, Steven; Zheng, Li, Vol.2,No.1, 1998
Analysis of End Milling Surface Error Considering Tool Compliance, Liang, Steven; Zheng, Li, Transaction of ASME, J. of Manufacturing Science and Engineering, Vol.120, No.1, 1998
Gerneralized Model of Milling Forces, Zheng, LI; Liang, Steven, Int. J. of Advanced Manufacturing Technology, Vol.14, No.3, 1998
Angle Domain Analytical Model for End Milling Forces, Zheng, LI; Liang, Steven, Transaction of ASME, J. of Manufacturing Science and Engineering, Vol.120,No.2, 1998
Identification of Cutter Tilt in End Milling, Zheng, LI; Liang, Steven, Transaction of ASME, J. of Manufacturing Science and Engineering,Vol.119,No.2,1997
Three Dimensional Cutting Force Analysis in End Milling, Zheng, LI; Liang, Steven, International Journal of Mechanical Science,1996/5,Vol38, No.5
主要国内期刊论文（中文）
The Yard-Controller Decision Making Support System in Technical Station based on Agent, ZD HE; L. ZHENG; ZH ZHANG; SD WANG; SC LIU, Railway Transport and Economy,2006.3
Design and Implementation of Agent-based Holonic Control System, P. ZHAO; L. ZHENG; DC LIU, MX PANG, Manufacturing Technology & Machine Tool, 2006-02
Ant colony optimization for the single machine early or tardy problem with distinct ready times, Y. SONG; ZH ZHANG; L. ZHENG, Journal of Tsinghua University(Science and Technology), 2005.11
EDM system design for Collaborative Design AmongEnterprises, XQ Yu, ZH Zhang, L. Zheng, CJ Hu, Computer Engineering and Application, 2005.10
Design in Large-scaled Logistics Networks Based on Combinatorial Genetic Algorithm, Q. TIAN; LX MIAO; L. ZHENG; ES QI, Logistics Technology, 2005.6
Remote Video Signal Process by using the effectiveness of monitoring information, CIMS, 2005.3
Process Based Performance Matrix for Manufacturing Industries, JR Zhu, DC LIU, W. Dong, L. Zheng, CIMS, 2005.3
Extracting Geometry Features in Ball End Milling Process Simulation, Y. Liu, ZZ Li, ZH Zhang, L. Zheng, Journal of Tsinghua Univesity, 2005.2
A Reliability Evaluation Method Based on failure date and statistics, YH Yang, ZZ Li, L. Zheng, Journal of System simulation, 2004.12
Design Methodology for Logistics Network by Using GA, Q. Tian, LX Miao, L. Zheng, Journal of Tsinghua University, 2004.11
Optimizing the Production Plan in Semiconductor Manufacturing, Q. Li, DC Liu, HZ Wang, L. Zheng, Manufacturing Technology and Machine Tool, 2004.11
Situation on Grid Research and Its Application in Manufacturing, B Yan, BQ Huang, L Zheng, TY Xiao, CIMS 2004.09
Analytical model to predict milling forces for arc curved surfaces, ZH Zhang, L. Zheng, L. Zhang, ZZ Li, Journal of Tsinghua University(Science and Technology), 2004.08
LP-based capacity planning in semiconductor manufacturing, Q LI; DC LIU; L. ZHENG; T. ZHANG, Semiconductor Technology, 2004.07
Research on Spares Management System with Simulation, YH Yan, JM Zhao, ZZ Li, L. Zheng, Acta Simulata Systematica Sinica, 2004.05
Solution framework for the large scale vehicle delivery/collection problem, ZW QU; LN CAI; C. LI; L. ZHENG, Journal of Tsinghua University(Science and Technology), 2004.5
A Study on a Integrated Framework of Information Modeling and Re-engineering for Design Process, CJ Hu, L. Zheng, ZZ Li, DB Tang, BP Zhang, China Mechanical Engineering, v 14, n 20, 2003.10
Wavelet-based fast modification of the free form surface of a soldier's helmet, Zhou, Hong; Li, Zhizhong; Jing, Yue; Liu, Hong; Zheng, Li; Huang, Xiancong; Bao, Yuanhui; Chen, Xiao, Journal of Tsinghua University, v 43, n 8, August, 2003
Industrial Engineering in the New Millennium, G. SALVENDY, L. ZHENG, XB ZHAO, Industrial Engineering and Management, 2002.03
A Web Based Agile Turning Parameter Planning System, XM Yang, L. Zheng, ZH ZhangXL Han, BP Zhang, China Mechanical Engineering, Vol.12, No.6, 2001.3
A Raference Framework for Concurrent Engineering, DunbingTang, Li Zheng, Zhizhong Li, Dacheng Liu, Hign Technology Letters, 2001, vol.7, No.1, pp.47-50
Virtual Machining Process: Concept, Method And Its Application, L. Zheng, DC Liu, ZZ Li, BP Zhang, CHINA MECHANICAL ENGINEERING, 1999.09
主要会议文章
Zhang Lei, Zheng Li, Zhang Zhihai. Numerical model for cutting forces in peripheral milling of curved surfaces. Proceedings of IE&EM’2002 & IceCE’2002, Sept.19-21, 2002, Beijing, China.
Gao Benhe, Zheng Li,et al. A Research to the Stress Model of the Non-completely Chip-breaking in Vibration Drilling. Proceedings of the 5th International Conference on Frontiers of Design and Manufacturing, July, 2002, Printed by DUT Printing House, Dalian, China: 263~269.
Gao Benhe, Liu Dacheng, et al. Management Research and apply of the Quality Assurance System in CIM Environment, Proceedings of IE&EM'2002 and IceCE'2002, September, 2002, Tsinghua University Press, Beijing, China.
Zhao Daquan, Zheng Li, Liu Dacheng: The Application of Fuzzy Cluster Analysis in Identification of Characteristic Temperature in Machine Tool (RID: 265), Proceedings of IE&EM' 2002 and IceCE' 2002
Niansong ZHANG, Dacheng LIU,Li ZHENG, Bopeng ZHANG. Resource Recycling Strategy of the Household Refrigerators. Proceedings of IE&EM 2002, Sept. 19-21, 2002, Beijing, China.RID108.
Liu Shaogang, Zheng Li, Liu Dacheng, Li Zhizhong. Fixture Selection under Fuzzy Environment. Proceedings of IE&EM 2002, Sept. 19-21, 2002, Beijing, China.
Liu Shaogang, Zheng Li, Zhang Zhihai. A Fuzzy Multiple Attribute Decision-making Approach for Supplier Selection. Proceedings of IE&EM 2002, Sept. 19-21, 2002, Beijing, China.
Hu Changjian, Li Zhizhong , Zheng Li, Zhang Bopeng. A Virtual Clustering Mechanism for Agent, Proceeding of IE&EM'2002 and IceEM'2002. Sept. 19-21, 2002, Beijing, China.
Yin Liu, Li Zheng,The research on the extraction method of cutting engagement in ball-end milling simulation(Rid 264), Proceeding of IE&EM'2002 and IceEM'2002. Sept. 19-21, 2002, Beijing, China. pp175
Pan Chunfeng, Liu Dacheng, Lu Jun, Cheng Lihui, Zheng Li. An Application of Web-based Remote Monitor System. Proceedings of IE&EM’2002 & IceCE’2002, Sept.19-21, 2002, Beijing, China
Li Zhizhong, Zheng Li, Tang Dunbing, Hu Changjian, Liu Dacheng, Li Litao. Interoperable Software Component of a Rule-Based Inference Engine for Product Development Decisions. 1st International Conference on Mechanical Engineering, Nov. 20-22, 2000, Shanghai
Li Zheng, Dunbing Tang, Zhizhong Li, “Web-based Technologies Enabling Agile Manufacturing”, International conference on eCommerce Engineering: New Challenges for Global Manufacturing in the 21st century (ICECE’21), Xi’an, Sept. 2001
ZHAO Daquan, LIU Dacheng, ZHENG Li, LI Zhizhong, ZHANG Bopeng, XIANG Weihong. Determining thermal restraints exactly in analysis of thermal deformations of machine tool. Proceedings of the Ninth International Manufacturing Conference in China. August 16-17, 2000. Hong Kong. P.R.C.
Yanbo LIU, Dacheng LIU, Li Zheng, Ruying Pang. Automatic meters reading system of PSTN-based telecommunication. Proceedings of ICeCE 2001.2001 International Conference on eCommerce Engineering: New Challenges for Global Manufacturing in the 21st Century. RID04-30.Sept.16-18, 2001. Xi'an, P.R.China.
Pang Ruying, Liu Dacheng, Zheng Li. The construction of Web-based electronic product catalogs system. Proceedings of ICeCE 2001.2001 International Conference on eCommerce Engineering: New Challenges for Global Manufacturing in the 21st Century. RID04-28.Sept.16-18, 2001. Xi'an, P.R.China.
LI Zhizhong, ZHENG Min, ZHENG Li, WU Zhijun, LIU Dacheng. A Solid Model-Based Milling Process Simulation and Optimization System Integrated with CAD/CAM. Proc. Of IMCC'2000. 2000. HongKong.
著作与讲义
Introduction to Standardization, CT LI ed. Chapter 16: Standardization and Mass customizations (in Chinese), 2005, People’s University Press
Li Zheng et al (Ed), "Strategic Production Network", Springer-Verlag, Berlin, Germany 2002
Li Zheng, DC Liu, ZZ Li, Virtual Manufacturing in Handbook of Modern Instrument, Science Press (in Chinese), 2003
BP Zhang, Li Zheng, et al, Advanced Manufacturing Technology, Post Press(in Chinese), 2003
Li Zheng, Ken Chen, BP Zhang, Manufacturing System, Tsinghua University Press(in Chinese), 20 |
|
