|
3.7 设计机构
设计机构是一个负责项目设计或修改的机构。该机构可能是一个美国政府、商业、或非盈利组织。
3.8 校准和测量要求概要（CMRS）
一个详细描述系统、子系统、或设备测量规定的报告；通过一个可用的独立军事部门的度量衡和校准程序，TMDE、标准和设备要求确保所有测量的可追溯。
3.9 自动试验设备（ATE）试验设备（UUT）界面
位于ATE上，便于访问所有输入和输出信号的点，易于与外部UUT或校准标准连接。
3.10 嵌入式试验（BIT）
采用嵌入式试验设备或自检硬件和软件的试验方式，在其内部设计中加入了支持系统、子系统、或设备，来测试所有或部分系统、子系统或设备。
3.11 嵌入式试验设备 (BITE)
作为系统、子系统或设备一部分的任何设备，被用来表述系统、子系统或设备的试验目的。BITE是系统、子系统或设备的一个可确认的设备。
3.12 校准间隔
最大时间，要求校准的一个项目可以可能在校准和仍完成它的目标测量可靠性之间。
华译网上海翻译公司曾经翻译过大量有关校准和测量要求概要资料文件。Beijing Chinese Subtitling Translation Service Agency has translated many technical documents about Calibration and Measurement Requirements Summary.
3.7 Design activity. A design activity is an activity that has responsibility for the design or modification of an item. The activity may be a U.S. Government, commercial, or nonprofit organization.
3.8 Calibration and Measurement Requirements Summary (CMRS). A report which details the measurement requirements of a system, subsystem, or equipment; the TMDE, and the calibration standards and equipment required to assure traceability of all measurements through the applicable individual military department's metrology and calibration program.
3.9 Automatic Test Equipment (ATE) Unit Under Test (UUT) interface. The point located on the ATE where all input and output signals are accessible for connection to an external UUT or calibration standard.
3.10 Built-in-Test (BIT). A test approach using built-in test equipment or self-test hardware and software that is internally designed into the supported system, subsystem, or equipment to test all or a part of that system, subsystem, or equipment.
3.11 Built-in-Test Equipment (BITE). Any device which is a part of a system, subsystem, or equipment and is used for the express purpose of testing the system, subsystem or equipment. BITE is an identifiable unit of the system, subsystem, or equipment.
3.12 Calibration interval. The maximum time an item, requiring calibration, may go between calibrations and still achieve its target measurement reliability.
|
